I don't know how well you know about stainless steel piston rod, but since we have chosen to use stainless steel piston rod to complete the relevant operation, then naturally we should have quality and quantity to complete. So how should we deal with and process the stainless steel piston rod? Let's get to know it together.
1. Heat treatment of stainless steel piston rod
In fact, in the stainless steel piston rod, if you want to process and treat it, then basically we will choose to use heat treatment method. Of course, the whole process is still somewhat complicated, mainly for annealing and forging, and then adjustments and so on. Let's start with the work of deflagration. The main purpose of doing this is to hope that his hardness can be reduced. Then we can cut it more conveniently. By annealing, we can further improve its toughness, and the performance of natural stainless steel piston rod will also be improved, and can better prevent deformation.
2. How to Eliminate the Stress of Stainless Steel Piston Rod
If you want to laser cutting stainless steel piston rod to eliminate stress, then naturally we have to carry out more operations, the key is that these operations are carried out in the cooling time, then the cooling speed is different at this time, so the stress is different, so we clean up relatively difficult, I do not know about you. What is the stress problem of stainless steel piston rod? But anyway, we all hope that the stainless steel piston rod can get good hardness and wear resistance which is useful to him, otherwise it will be difficult to deal with any problems.
Having said so much about stainless steel piston rod, I don't know what you know about it. If you think there are any problems in our introduction of stainless steel piston rod, you can also put it forward and we will correct it. But we also hope to give us an opportunity to exchange and cooperate. |
ENGLISH
簡體中文
Requirements of Piston Rod for Each Part
]